There is a range of accessories suitable for use with S300, including junction channel, gully unit, closing end cap, outlet end cap and foul air trap.
1766J Junction Channel
ACO offer 500mm long junction channel to suit constant depth level invert S300 channel with 390mm overall depth. S300 junction channels are supplied complete with a vertical knock-out for connection to 200mm PVC-U pipework. All junction channels also have side knock-out options for 90° channel connection.
ACO S30 range includes a specific gully top (product code 3102). The gully top is supplied complete with slotted ductile iron gratings and is installed with either a shallow base unit (1614) or deep base unit (4198) in conjunction with a silt bucket (1616) to complete the gully assembly. The gully unit offers various connection options to either 110mm, 160mm or 200mm diameter PVC-U pipe, and can be “trapped” with the addition of a foul air trap, for further details regarding this please refer to our article “S Range Foul Air Traps”. Please note the invert depth of the outlet connection can be increased with the addition of a raising piece (1697) by a further 300mm.
Closing End Cap
Closing End Cap is manufactured from polymer concrete with an integral cast iron edge and is used at the end of a channel run to “close” the run.
Outlet End Cap
Outlet End Cap is manufactured from polymer concrete with an integral cast iron edge and is used at the end of a channel run to provide an outlet connection to 200mm diameter PVC-U pipe using a connector/socket.
Foul Air Trap
ACO offer a standard foul air trap which can be used in conjunction with the S300 gully unit if connecting to a combined or foul water system with 160mm diameter for connection to PVC-U pipe using a connector/socket.
For further details regarding the foul air traps and connection to a sump unit please refer to our article “S Range Foul Air Traps” in the S Range section.