Please refer to the attached ACO installation drawing number 24125.
The Threshold Drain channel should be laid onto a concrete bed (minimum strength C12/15) with minimum thickness of 50mm.
The Threshold Drain channel should be installed 3-6mm lower than the surrounding surface finish.
Installation with Block Paving:
The polymer modified mortar referred to is readily available from most builder’s merchants, but this can be a standard sand and cement mix with a “SBR” additive.
Installation with Partial Concrete Surround and Block Paving
The polymer modified mortar referred to is readily available from most builder’s merchants, but this can be a standard sand and cement mix with a “SBR” additive.
To view full product details please visit www.aco.co.uk
Comments
0 comments
Article is closed for comments.